Sunday, October 06, 2013

A bicycle (bag) built for two

bikebasket  bikergirl

Annabel has been wanting a basket for her bike ever since the training wheels came off. When we couldn't find anything that suited her "style" she decided I could make one with our sewing machine.

I procrastinated for a while, but then I had an idea. I could quilt one using scrap fabrics and a length of high-loft batting I had found in a remnant bin.

I pieced together the top to fit the width of the batting, basted it to the batting and quilted it along the seam lines. Next, I pinned in place the backing, attached a homemade bias tape to the edges and stitched all the way around. Folding the quilted side together so that about four inches remained unmatched, I sewed the long edges and turned it inside out to form the bag. I toyed with the idea of boxing the corners (as might notice in the picture) but I decided to keep it simple.

I top stitched along the back of the top edge to made a crease in the flap for easier folding. Finally I cut two 12" strips of grosgrain ribbon and stitched them to the outside edge of the flap (three inches from each side of center) so the basket could be tied to the handlebars.

It was such a success that Silas demanded one for his bike.

messangerbasket   BASKET


Of course I was out of batting  ... and he wasn't really keen on the pretty quilted look (he wanted man-eating sharks on his basket)... So I procrastinated again.

Until today, when I found some olive-drab twill at the local junk shop (three yards for $6) and thought it would make a nice temporary "bike basket" that I could put on my bike if he didn't want it. 

I used the same basic design as before -- two rectangles of fabric (outer and lining) but without the interfacing or batting. I made the exterior of the bag first, leaving a four-inch section at the top for a flap and then sewed the lining. I boxed the corners for both bags before inserting the lining, turning the bag inside out and stitching around the opening. I then stitched the bias tape around the flap and opening. Finally, I stitched the straps (ribbons that I'd saved from some of our wedding gifts, actually) to the back of the bag. 

Silas took one look at the bag I was now coveting, and decided he didn't care about sharks after all.

Just my luck.

1 comment:

Gail at Large said...

Very nice!

My mother sewed all the time when I was growing up, which was apparently enough to turn me off it for life... (I was forced to all the finishing!)